how to remove boat shrink wrap for reuse
Boat shrinkwrap will provide good protection for your boat in storage, but it's not cheap. bill toth has found a way to counteract that. if done correctly with care given for removal, storage, and re-installation, one can get many years out of one wrap job. i am on my sixth year.. Boat shrink wrap is a thick plastic material that is applied to a boat and then heated with a heat gun, which causes it to shrink and form a tight seal that keeps out moisture, dust, pests, and more. many boaters use it for transporting their boat or storing it for the winter , and if you’re one of them you’ll have to remove it before you. We finally remove the shrink wrap from our boat after a long winter in the pacific northwest. more on our website: http://pacificsailors.com/2017/05/shrink-w....
how to remove boat shrink wrap for reuse Secure the shrink wrap to the back end of the boat. head to the stern, then begin tucking the shrink wrap like you did for the boat’s other sides. cut off the excess material as needed after covering the propeller or any other exposed parts. then, heat the edge of the shrink wrap to flatten and secure it to the boat.. No matter what you do it will still be loose - this is how boats get damaged. it's not possible to draw the lines up tight enough to ge a good fit - 5-8 mil shrink wrap shrinks at least 50 percent by 50 percent as it cools, which is where the tension comes from that keeps it from flapping and damaging mounts, popping stanchions, rubbing and chafing paint and gelcoat, et cetera..
0 comments:
Post a Comment